Engine Testing For Synfuel Operation

Daniel W. Dickey
Shannon Vinyard
Tim. J. Callahan
Thomas W. Ryan III
Mary Ann Warner-Selph
Norman R. Sefer

Part 1					1 - 106
List of Illustrations					iv
List of Tables					viii
1.	Summary				1
2.	Introduction				3
	2.1		Background		3
	2.2		Objective		3
	2.3		Approach		4
3.	Conclusions				6
4.	Recommendations				9
5.	Test Setup and Procedures				10
	5.1		Test Material		10
	5.2		Test Setup		12
	5.3		Phase I Test Procedure		15
	5.4		Phase II Test Procedure		20
6.	Results				22
	6.1		Performance Tests		22
			6.1.1	Performance and Emissions	22
			6.1.2	Combustion Analysis Results	25
			6.1.3	Conclusions	44
			6.1.4	Recommendations	45
	6.2		Cold Starting Tests		45
			6.2.1	Cold Start Test at 0°C	45
			6.2.2	Cold Start Test at -20°C	46
	6.3		Idle Deposit Tests		46
	6.4		Phase II Results		53
			6.4.1	Performance and Emissions Results, Simulated Air to Air After cooling	53
			6.4.2	Combustion Analysis Results, Simulated Air to Air After cooler	65
			6.4.3	Performance and Emissions Results, Simulated Air to Air After Cooler and High Pressure Fuel Injection System	67
			6.4.4	Combustion Analysis Results, Simulated Air to Air Aftercooler and High Pressure Fuel Injection System	73
	6.5	Phase II Cold Start Results at 0°C and -20°C			78
References					82
Appendices - A through E					83
Part 2			Appendices F through H		107 - 228
Part 3			Appendices - I through P		229 - 346
Distribution List					347