|
Return to DOE Report Table of Contents
Return to Carbon Coated (Carbonous)
Catalyst in Ebullated Bed Reactor Table of Contents
Carbon Coated (Carbonous) Catalyst in Ebullated Bed Reactor
For Production of Oxygenated Chemicals from Syngas/CO2:
Second Annual Report for October 1, 2000 - September 30, 2001
Donald Krastman
Richard Noceti
Cynthia Mitchell
Hydrocarbon Technologies, Inc.
In
this pdf format, this document has
34 pages and is 474KB
Table of Contents
| INTRODUCTION |
1 |
| OBJECTIVE |
1 |
| WORK PLAN |
1 |
| WORK ACCOMPLISHED IN THE SECOND
YEAR OF THE PROGRAM |
2 |
| Task I & II: Catalyst Preparation
and Characterization |
2 |
| 1) |
Carbon-Coated Cesium-Copper-Zinc-Chromite SOTA Catalyst |
2 |
| 2) |
K-Mn Promoted ZrO2 Advanced Catalyst |
4 |
| 3) |
SEM/EDS and XPS Analyses of Carbonous Catalyst Extrudates |
5 |
| Task III: Experimental Run for
Catalyst Activity Studies |
5 |
| 1) |
Catalyst Activity Test Run 245-59 With Carbon-Coated SOTA
Cesium-Promoted Zinc-Chromite Catalyst |
5 |
| 2) |
Microautoclave Test Runs for Liquid Medium Stability Studies |
14 |
| 3) |
Catalyst Activity Test Run 245-60 With Carbon-Coated SOTA
Cesium-Promoted Copper-Zinc-Chromite Catalyst |
15 |
| 4) |
Catalyst Activity Test Run 245-64 With Carbon-Coated SOTA
Cesium-Promoted Copper-Zinc-Chromite Catalyst |
19 |
| Task IV: Large Scale Process for
Carbon-Coated Catalyst Production |
26 |
| Task VI: Cost Estimation |
28 |
| CONCLUSION |
30 |
| FURTHER WORK PLANNED |
30 |
| 