T.O.M. Microfilm Reel 133
(Original Designation Navy Reel 5288)
Table of Contents
Plans/Drawings Of K-K Catalytic Cracking Process Of The Ammoniawerk Merseburg, Of I.G. Farbenindustrie At Leuna, Germany.
Frame Drawing Title
No. No.
1. Working plan – general plant layout. Ruhrchemie A. G. 1943. 4 pages.
2. M-02-1 Condenser – low temperature condenser – cooler. Ammoniawerk Merseburg. 2 pages.
3. M-05-1 Nitrogen cooler – 422 tubes – 175 m2. 2 pages.
4. M-06-1 Inlet pipe for regenerator part oven. 2 pages.
5. M-08-1 Heat exchanger 75 m2 surface. 2 pages.
6. M-09-1 Main air duct for regenerator oven. 2 pages.
7. M-010-1 Half inlet pipe for regenerator part of oven. 2 pages.
8. M-020b-1 KK test oven – Upper part – spouts – plate cooler – Inlet and outlet pipes. 2 pages.
9. M-021-1 Feeler – Optical observer – nitrogen protector. 2 pages.
10. M-025-1 Gas burner and its protection. 2 pages.
11. M-028-1 Detail of inlet valve in heat exchanger. 2 pages.
12. M-033-1 Flow sheet – sketch. 1 page.
13. M-035-1 Layout sketch for Denbon oven. 2 pages.
14. M-036-1 Sketch of oven cover. 4 pages.
15. M-039-1 Sketch of oil spraying. 1 page.
16. M-040-1 Pipes and lines – and machinery location for clearance. 2 pages.
17. M-043-1 Sketch of the KK plant project. 4 pages.
17a. M-044-1 Unlabeled. 2 pages. 2 pages.
18. M-11-1 Scavenging pipes for regenerator oven. 2 pages.
19. M-12-1 Half scavenging pipes for regenerator oven. 2 pages.
20. M-13-1 Outlet pipes for regenerator oven. 2 pages.
21. M-14-1 Half outlet pipes for regenerator oven. 2 pages.
22. M-15-1 Steel work for filling spout. 2 pages.
23. M-16-1 Details of parts of charging mechanism. 2 pages.
24. M-17-1 Assembly of charging mechanism. 2 pages.
25. M-22-1 Perspective view of in and out pipes of the oven. 2 pages.
26. M-24-1 Details of oven. 2 pages.
27. M-27-1 Details of parts of driving mechanism. 2 pages.
28. M-26-1 Collector for oil pressure drive. 2 pages.
29. M-38-1 Sketch of assembly. 2 pages.
30. M-5927-1 Mechanical details of filling apparatus. 2 pages.
31. M-6128-1 Details of sluice – parts 1-13-21-38. 2 pages.
32. M-6134-1 Details of sluice, 2, 5, 8, 11, 16, 19, 23, 24, 25, 26, 30, 31, 32, 35, 36, 41, 42, 43, 45, 46, 47. 2 pages.
33. M-6144b-1 Details of filling mechanism. 2 pages.
34. M-6171-1 Indexed assembly of filling mechanism. 2 pages.
35. M-6206-1 Details of valve. 2 pages.
36. M-6240-1 Steel work and assembly of sluice drive. 2 pages,
37. M-01-2 Drives for the bucket conveyors. 1 page.
38. M-02-2 Assembly of the bucket conveyors. 1 page.
39. M-03-2 Overall dimension sketch of KK oven. 1 page.
40. M-04-2 Assembly of the bucket conveyors. 1 page.
41. M-05-2 Plate cooler for testing, regenerating oven. 1 page.
42. M-06-2 Description of the fresh air inlet also the oil spray. 1 page.
43. M-07-2 Overall dimension sketch of KK oven. 1 page.
44. M-08-2 Preheater – 115 m2 - 800 mm f x 6000” long. 1 page.
45. M-09-2 Compensator (expansion joint). 1 page.
46. M-013-2 Location of the electric motors. 1 page.
47. M-014a-2 Assembly and details of condenser 920 mm. f x 6915 mm long - 139 m2 surface. 1 page.
48. M-015a-2 Assembly & details of low temperature condenser-470 mm f x 6605 mm long. 29m2 surface. 1 page.
49. M-016a-2 Washing tower, 2000 mm f - 5900 mm high. 1 page.
50. M-017a-2 Lower part of the KK testing oven – Brickwork. 1 page.
51. M-021-2 Tar separator 1000 mm f x 3506 mm high. 1 page.
52. M-024-2 Details of drive mechanism. 1 page.
53. M-025-2 Outlet pipe for regenerator portion. 1 page.
54. M-026-2 Half outlet pipe for regenerator portion. 1 page.
55. M-027a-2 Inlet pipe for regenerator portion. 1 page.
56. M-028a-2 Half inlet pipe for regenerator portion. 1 page.
58. M-030a-2 Foundation plan and machinery anchoring. 1 page.
59. M-031-2 Bunker at inlet mechanism. 1 page.
60. M-032-2 Details of drive mechanism. 1 page.
61 M-033-2 Closing mechanism of the sampling device. 1 page.
62. M-034-2 Preheater and mixing tuyere (?) – Details. 1 page.
63. M-035-2 Burner and lighter for the preheater. 1 page.
64. M-036-2 Burner and mixing tuyere (?) for KK installation. 1 page.
65. M-040-2 Quenching nitrogen delivery. 1 page.
66. M-041-2 Details of Distributor support. 1 page.
67. M-042-2 Details of Distributor parts. 1 page.
68. M-043-2 Sketch of the control of air pipes. 2 pages.
69. M-045-2 Protection for the inlet for the lower half of the scavenging pipe. 1 page.
70. M-046-2 Layout for the two half scavenging pipes for the cracking portion. 1 page.
71. M-049-2 Assembly drawing of the Distributor and supports. 1 page.
72. M-10-2 Filling mechanism. 1 page.
73. M-11-2 Lower plate. 1 page.
74. M-18-2 Main air inlet duct with connections to brick-work and expansion joint. 1 page.
75. M-11603-2 Upper part of the KK testing oven – Brickwork. 1 page.
76. M-12386-2 Chain sprockets for drives. 1 page.
77. M-12712-2 Lower portion of steelwork. 1 page.
78. M-12724-2 Large and small oil pipes with expansion joints. 1 page.
79. M-12824-2 Installation of the photocells and their protection. 1 page.
80. M-01-4 Steel container – 2500 x 1000 – 2.2 m3 cap. 1 page.
81. M-02-4 Separator 419 mm f x 750 mm high. 1 page.
82. M-03-4 Air pipe Distribution for the oven chamber. 1 page.
83. M-04-4 Foundation of compressors. 43 and 44. 1 page.
84. M-06-4 Control mechanism of the air pipes with packing glands. 1 page.
85. M-017-4 Reflection plate. 1 page.
86. M-018-4 Dashpot for hydraulic control of valve. 1 page.
87. M-020-4 Reflection plates. 1 page.
88. M-021-4 Details of parts of separator supports. 1 page.
89. M-022-4 Installation of filling bunker & spout. 1 page.
90. M-12-4 Dashpot for hydraulic control of valves. 1 page.
91. M-13-4 Insulation for sluice. 1 page.
92. M-14-4 Insulation for sluice. 1 page.
93. M-9562-4 Oil inlet pipe. 1 page.
94. M-03-8 Silica not for gas burner. 1 page.
95. M-04-8 Other mixer 800 mm f x 1800 high. 1 page.
96. M-05-8 Mixer for gas and combustion air. 1 page.
97. M-06-8 Separator trap – 1000 mm f - 1600 mm high. 1 page.
98. M-07-8 Separator 500 mm f - 1620 mm long with cooling coil. 1 page.
99. M-08-8 Separator trap – 800 mm f 700 mm high. 1 page.
100. M-09-8 Mantel to remove the hairpin tubes of the 275 m2 heat exchanger. 1 page.
101. M-013-8 Pump foundation # 31. 1 page.
102. M-014-8 Pump foundation # 35. 1 page.
102a. M-015-8 Unlabeled. 1 page.
103. M-016-8 Arrangement of traveling crane above oven. 1 page.
104. M-017-8 Separator – 600 mm f x 1160 mm. 1 page.
105. M-018-8 Protector plate – 1120 mm f 3080 mm long. 1 page.
106. M-019-8 300 mm f x 600 mm high filter pot. 1 page.
107. M-10-8 Pump foundation #33. 1 page.
108. M-11-8 Pump foundation #32 and #34. 1 page.
109. M-12-8 Pump foundation #36. 1 page.
110. M-06-16 Well for the KK installation. 1 page.
111. M-07-16 Calculation for the lower sluice driving mechanism. 1 page.
112. M-08-16 Arrangement of safety rip plate near burners. 1 page.
113. M-09-16 Calculations for the sluice driving mechanism. 1 page.
114. M-10-16 Packing for the samples. 1 page.
115. M-20-8 Unlabeled. 1 page.
116. M-21-8 Unlabeled. 1 page.
117. M-22-8 Unlabeled. 1 page.
End of reel 133.