T

T. O. M. Reel 136

(originally designation US Navy reel 5814-1)

Drawings of the Winkler gas producer at Werk Bohlen of Braun-Kohle Benzin.

(note – all drawings identified as “poor quality” on microfilm, but most scanned well. Those still with legibility problems are identified as such below)

Item

1. Drawing 54-1. Winkler generator installation at Zeitz. Plant of the generator preheater.

2. Drawing 90-1. Adjustable winch.

3. Drawing 91-1.

4. Drawing 96-1. Stirring arm for the generator.

5. Drawing 98-1. Conical ring of the generator.

6. Drawing 115-1. Supporting ring, spherical zone and support of “grudebunker”.

7. Drawing 116-1. Shell of “grudebunker”.

8. Drawing 125-1. Two generator shells and supports.

9. Drawing 137a-1. Shell of Winkler generator No. 1, Zeitz fuel plant.

10. Drawing 192-1. Platform and ladder for Winkler generator preheater.

11. Drawing 193-1. Sheet metal shell of generator preheater, 2.2 meters ID (Brabag).

12. Drawing 194-1. Two brackets for 15 tons, one bracket for 5 tons, for generator.

13. Drawing 321-2. Four 40 cubic meter coal dust bunkers.

14. Drawing 349-2. “Grudebunker” for the Boehlen generator installation.

15. Drawing 354-2. Chimnet for the generator preheater.

16. Drawing 355-2. Water gas line, 2000 mm, sheet 1.

17. Drawing 356-2. Water gas line, 2000 mm, sheet 2.

18. Drawing 357-2. Water gas lines, 100 and 1200 mm.

19. Drawing 398-2. Housing for bottom support of the hollow shaft, and intermediate housing.

20. Drawing 399-2. Part of stuffing box – release.

21. Drawing 441-2. Firing building: construction drawings for bricking the inlet and outlet lines of the generator preheater.

22. Drawing 447-2. Drive of the discharge from the multiclones to the Winkler installation.

23. Drawing 548-2. Drive of the stirrer of the Winkler generator.

24. Drawing 690-1. Stirrer holder.

25. Drawing 691-1. Intermediate section of “Grudebunker” from 5320 to 2660 mm.

26. Drawing 692a-1. Water gas line, 2000 mm.

27 Drawing 693-1. Supporting ring and spherical section of the “Grudebunker”.

28. Drawing 694-1. Shell of “Grudebunker”.

29. Drawing 695-1. Discharge of “Grudebunker”.

30. Drawing 696-1. Conical section of generator III.

31. Drawing 691-1. Generator shell III, 5.5 meters diameter, for Boehlen expansion.

32. Drawing 701a-1. Shell of generator preheater II of 2.2 meters ID.

33. Drawing 702-1. Waste heat boiler.

34. Drawing 704-1. Platform for Winkler generator III.

35. Drawing 705-1. Platform for Winkler generator III.

36. Drawing 710-1. Steel construction of generator II, bottom part.

37. Drawing 711-1. Platform and ladders on generator III.

38. Drawing 715-1. Heating coils, etc.

39. Drawing 716-1. Steel construction of upper part of generator preheater II.

40. Drawing 717-1. Arrangement of platforms for waste heat boiler.

41. Drawing 718-1. Grating support for the flue construction over generator preheater II.

42. Drawing 719-1. Refractory construction.

43. Drawing 720-1. Refractory construction.

44. Drawing 722-1. Runway between generators II and III.

45. Drawing 723-1. Roller support.

46. Drawing 724-1. Ash removal screw assembly.

47. Drawing 725-1. Gas line.

48. Drawing 726-1. Stirring mechanism.

49. Drawing 727b-1. Boehlen fuel plant expansion.

50. Drawing 729-1. Adjustable winch.

51. Drawing 730-1. Switch lever to drive ash screw.

52. Drawing 731-1. Housing for ash screw. Very poor quality.

53. Drawing 735-1. Bracket for generator preheater II.

54. Drawing Illegible. Very poor quality. Possibly 747-1 ?

55. Drawing 736-1. Operating platform and ladders for generator preheater.

Drawing 747-1. Missing, but included in original index.

56. Drawing 748-1. Refractory construction. Very light.

57. Drawing 817-2. Cover for “Grudebunker”.

58. Drawing 819-2. Flue over Winkler generator III.

59. Drawing 820-2. Winkler generator III, refractory dimensions.

60. Drawing 821a-2. Flue over generator preheater II.

61. Drawing 822-2. Borings in the supporting rings of the Winkler generator, the “Grudebunker” and the preheater.

62. Drawing 824-2. Supporting ring with platform supports at the 8.948 meter level of Winkler generator III.

63. Drawing 825-2. Spherical top of Winkler generator III.

64. Drawing 826-2. Braces for the water gas line of Winkler generator III.

65. Drawing 828-2. Storage vessel.

66. Drawing 830-2. Supports for the platform of the condensate vessel of Winkler generators II and III.

67. Drawing 831-2. Supplementary sheet for the platform at 23.9 meters on Winkler generator III.

68. Drawing 832-2. Covering between the top and the platform of Winkler generator III at level 23.9 meters.

69. Drawing 833-2. Elevation of Winkler generator preheater and “Grudebunker”.

70. Drawing 834-2. Refractory linings.

71. Drawing 835-2. Refractory linings (?). Very poor quality.

72. Drawing 835-2. Refractory linings (?). Somewhat better.

73. Drawing 836-2. Base plate of switches and motors for ash discharge screw.

74. Drawing 838-2. Control panel for Winkler generator. Pretty light – hard to read.

75. Drawing 839a-2. Connecting lines between “Grudebunker”, preheater, and generator III.

76. Drawing 840-2. Foundation for ash discharge drive.

77. Drawing 842-2. Ladder for generator III.

78. Drawing 843-2. Liquid fuel plant, Boehlen.

79. Drawing 844-2. Cogwheel of stirring arm drive.

80. Drawing 845-2. 400 mm fuel supply with spindle activation.

81. Drawing 846-2. 40 mm peep hole for Winkler generator.

82. Drawing 847-2. Peep hole closure.

83. Drawing 848-2. Casting for water inlet and outlet lines for stirring device.

84. Drawing 849-2. Grade bars and attachments for Winkler generator.

85. Drawing 850-2. Winkler generator grates.

86. Drawing 1007-2. Winkler generator expansion, plant and elevation.

87. Drawing 1404-2. Cleaning tower installation, details of lines.

88. Drawing 1405-2. Cleaning tower installation, details of lines.

89. Drawing 1406-2. Cover support of purification tower 6800.

90. Drawing 1408-2. 200 mm air valve for top of purification tower.

91. Drawing 1409-2. Bearing.

92. Drawing 1461-1. 2000 mm water gas line. Changes to Winkler generator.

93. Drawing 1667-2. Main ventilator.

94. Drawing 2113-2. JZM 1767-2. Building 411/405.

95. Drawing 2114-2. JZM 1766-2.

96. Drawing 2133-1. JZM 1747-1.

97. Drawing 2187-1. Winkler generator explansion Boehlen A3. Fairly light.

98. Drawing 2197-1. Nozzle ring pipe A3 liquid fuel plant. Poor quality.

99. Drawing 2396-1. JZM 1764-1.

100. Drawing A181-1. Braunkohle-Benzin A.G. 92-1. Very poor quality.

101. Drawing A203-1. Braunkohle-Benzin A. G. 363-1. Relatively poor quality.

102. Drawing A249-1. Braunkohle-Benzin A. G. 444-1.

103. Drawing A345-2. Braunkohle-Benzin A. G. 268-2. Pretty bad.

104. Drawing A346-2. Braunkohle-Benzin A. G. 288-2.

105. Drawing A430-2. Braunkohle-Benzin A. G. 295-2.

106. Drawing A490-1. Braunkohle-Benzin A. G.

107. Drawing A529-1. Braunkohle-Benzin A. G. 5027-1. Fairly awful.

108. Drawing A539-1. Braunkohle-Benzin A. G. 5027-1. Ditto.

109. Drawing A553-1. Braunkohle-Benzin A. G. TZ1-1. Decent.

110. Drawing A791-2. Braunkohle-Benzin A. G. 1718-2.

111. Drawing A881-2. Braunkohle-Benzin A. G. 1792-2.

112. Drawing A929-2. Braunkohle-Benzin A. G. 5028-2. Fairly poor.

113. Drawing A935-2. Braunkohle-Benzin A. G. 5044-2.

114. Drawing A936-2. Mineralol Baugesellschaft m.b.H. 3242-2. Marginal.

115. Drawing A950-2. Mineralol Baugesellschaft m.b.H. 3291-2. Marginal.

116. Drawing A955-16. Waste heat boiler III, Brabag.

117. Drawing A1035-2. Braunkohle-Benzin A. G. 5137-2. Marginal.

118. Drawing A1075-2. Braunkohle-Benzin A. G. 5175-2. Marginal.

119. Drawing A1622-2. Multiclone with 12 150 mm tubes of Beth filter.

120. Drawing Ze568-2. Mineralol Baugesellschaft m.b.H. 2825-2.

121. Drawing Ze550-2. Mineralol Baugesellschaft m.b.H. 3521-2.

122. Drawing JZM232m-1. Photostat of layout of Boehlen Werk of Braunkohle-Benzin A. G. dated July 9, 1943.

123. Drawing 4E25839. Winkler generator with 4900 mm shaft, grateless model, proposal II.

124. Drawing A449-1. Boehlen plot plan, scale 1-1000.