| Return to DOE Report Table of 
Contents - T Return to the Early Entrance Co-Production Plant Table of Contents Early Entrance Coproduction Plant Phase II - Task 2.4: Low Btu Combustion Test
 Chi M. HoRobert A. Battista
 Ashok Anand
 Kenneth Yackly
 Texaco Energy Systems 
In the pdf format this document has 45 
pages and 404kb Table of Contents 
  
  
	
		
			| Abstract | 3 |  
			| I | List of Graphical Materials | 6 |  
			| II | Executive Summary | 7 |  
			| III | Test Report | 9 |  
			|  | 1.0 | Introduction | 9 |  
			|  | 1.1 | Objectives | 12 |  
			| 1.2 | Approach | 12 |  
			| 2.0 | Test Facilities | 13 |  
			|  | 2.1 | Fuel Blending System | 13 |  
			| 2.2 | Test Stand and Test Hardware | 13 |  
			| 2.3 | Instrumentation | 16 |  
			| 3.0 | Test Description | 19 |  
			|  | 3.1 | Test Procedure | 19 |  
			| 3.2 | Test Point Conditions | 20 |  
			|  | 3.2.1 | Fuel Composition Planned | 21 |  
			| 3.2.2 | Test Points Planned | 21 |  
			| 3.2.3 | Test Point Measured Versus Test Point Planned | 23 |  
			| 4.0 | Results and Discussions | 27 |  
			|  | 4.1 | Fuel Properties | 27 |  
			| 4.2 | Combustor pressure drop and velocity 
			between flow sleeve and liner | 32 |  
			| 4.3 | Liner Metal Temperature | 32 |  
			| 4.4 | Combustor Exit Temperature Profiles | 32 |  
			| 4.5 | Combustion Dynamics | 33 |  
			| 4.6 | Emissions | 33 |  
			| 5.0 | Conclusions / Recommendations | 35 |  
			| 6.0 | Bibliography | 37 |  
			| 7.0 | List of Acronyms and Abbreviations | 38 |  
			| 8.0 | Appendix | 40 |  
   |