FOREWORD |
v |
ACKNOWLEDGEMENTS |
v |
DISCLAIMER |
v |
EXECUTIVE SUMMARY |
vi |
|
PILOT TEST OF THE CROWTM PROCESS AT THE BELL LUMBER
AND POLE SITE |
1 |
|
IN SITU TREATMENT OF MANUFACTURED GAS PLANT CONTAMINATED SOILS,
DEMONSTRATION PROGRAM |
3 |
|
OPERATION AND EVALUATION OF THE CO2 HUFF-N-PUFF
PROCESS |
5 |
|
OIL FIELD WASTE CLEANUP USING THE TANK BOTTOM RECOVERY AND
REMEDIATION PROCESS |
9 |
|
ENHANCED GRAVITY DRAINAGE OF OIL IN THE NORTH TISDALE RESERVOIR |
14 |
|
ASSESSMENT, DESIGN, AND TESTING OF OIL RECOVERY AND PROCESSING
TECHNOLOGIES FOR NEAR-SURFACE RESERVES |
19 |
|
SHALLOW OIL PRODUCTION USING HORIZONTAL WELLS WITH ENHANCED OIL
RECOVERY TECHNIQUES |
23 |
|
MODEL DEVELOPMENT AND TESTING OF STEAM INJECTION TUBULARS |
27 |
|
EVALUATION OF A MOLECULAR SIEVE CARBON AS A PRESSURE SWING
ADSORBENT FOR THE SEPARATION OF NITROGEN FROM NATURAL GAS |
31 |
|
CHARACTERIZATION OF PETROLEUM RESIDUA |
34 |
|
MILD GASIFICATION OF USIBELLI COAL |
36 |
|
SERIES B PILOT-PLANT TESTS |
38 |
|
FEASIBILITY OF USING WOOD-DERIVED FUEL FOR COGENERATION |
40 |
|
BENCH-SCALE SIMULATION OF QUENCHING AND STABILIZATION OF
MODIFIED IN SITU OIL SHALE REPORTS |
45 |
|
INVESTIGATION OF THE ROPETM PROCESS PERFORMANCE ON
SUNNYSIDE TAR SAND |
50 |
|
EVALUATION OF PRODUCTS RECOVERED FROM SCRAP TIRES |
53 |
|
REMOTE CHEMICAL SENSOR DEVELOPMENT |
55 |
|
A STANDARD TEST METHOD FOR SEQUENTIAL BATCH EXTRACTION |
58 |
|
NMR ANALYSIS OF ORGANIC MATTER IN SEDIMENTARY ROCKS |
66 |
|
TESTING AND DEMONSTRATION OF UTILIZATION OF WYOMING FLY ASH |
69 |
|
HAZARDOUS WASTE STABILIZATION UTILIZING CLEAN COAL COMBUSTION
WASTE MATERIALS |
76 |
|
DEVELOPMENT OF A HYDROLOGIC DATA MANAGEMENT SYSTEM |
79 |
|
CHARFUEL PROCESS |
80 |