TITLE: Commercial-scale demonstration of the Liquid Phase Methanol (LPMEOH(trademark)) process. Technical progress report number 2, July 1--September 30, 1994.

INST.  AUTHOR: Air Products and Chemicals, Inc., Allentown, PA (United States).

SPONSOR: Department of Energy, Washington, DC.

LANGUAGE: English

PUB.  TYPE: Technical Report

PUB.  COUNTRY: United States

SOURCE: Department of Energy [DE],  1994,  150p.

NTIS ORDER NO.: DE98050283INW

ABSTRACT:

The project involves the construction of a 260 tons-per-day (TPD) or 80,000 gallon per day methanol demonstration unit utilizing an existing coal-derived synthesis gas from Eastman. The new equipment consists of synthesis gas feed preparation and compression, liquid phase reactor and auxiliaries, product distillation, and utilities. The technology to be demonstrated was developed by Air Products in a DOE sponsored program that started in 1981. Originally tested at a small, DOE-owned experimental facility in LaPorte, Texas, the LPMEOH(trademark) process offers several advantages over current methods of making methanol. This liquid phase process suspends fine catalyst particles in an inert liquid, forming a slurry. The liquid dissipates heat from the chemical reaction away from the catalyst surface, protecting the catalyst and allowing the gas-to-methanol reaction to proceed at higher rates. The process is ideally suited to the type of gas produced by modern coal gasifiers. At the Eastman Chemical complex, the technology will be integrated with existing coal gasifiers to demonstrate the commercially important aspects of the operation of the LPMEOH(trademark) Process to produce methanol. A four-year demonstration will prove the commercial applicability of the process. An off-site product-use test program will prove the suitability of the methanol as a transportation fuel and as a fuel for stationary applications in the power industry.

REPORT  NUMBER: DOE/PC/90543-T10

CONTRACT  NUMBER: FC22-93PC90543